This is a Jikkou yanagiba knife. The blade length is approximately 24cm. The steel is molybdenum vanadium steel. The handle is a metal monaka handle. It has the H-INOX stamp. (It did.) Since it was machine-sharpened, I polished the flat and back sides, and the Jikkou stamp (laser printing) disappeared. (I have also included a photo before polishing for reference.) I made it almost a mirror finish, but some fine scratches remain. I recommend it if you don't mind. It seems that you can wash it in a dishwasher because it has a monaka handle, but you can wash the whole thing, so it's good for keeping it clean, and it's also good that it's rust-resistant. As it is a professional product, it is also good that it is easy to sharpen and maintain with INOX steel. It is generally clean and an easy-to-use size, so I recommend it for professionals and general users. It has been finished with a Kitayama 8000 grit stone, a Shapton 12000 grit stone, and a natural whetstone. It is in a very sharp condition, so you can use it immediately. ● Size: Blade length approx. 240mm ● Blade thickness: Approx. 2.5mm at the thickest part of the base of the blade ● Overall length 370mm ● Weight 167g #Knife #Yanagiba #Jikkou #24cm