# You can see all products from Sakura Miyabi Acrylic Boards ☆ ⚠️ As of December 24th, only 3mm sheets can be secured in 1kg quantities for one type. For other thicknesses, even if you specify them, other thicknesses may be mixed in. Slightly larger pieces with both sides over 6cm will also be included. ☘️ These are offcuts of acrylic sheets from our processing factory. ☘️ They are new, unused items with the protective film still attached. ☘️ We will pack as much as possible into a dedicated box (within the weight limit). ☘️ 【1mm/1.5mm/2mm/Rarely 4mm】 【3mm】 【5mm/Rarely 8, 10mm】 We have separated them into boxes for each thickness, so if you have a preference, please let us know after purchase. If you have no specific requests, we will include them in order of the most abundant. ☘️ They are machine-cut, so the right angles are accurate. ⚠️ These are small offcuts with a short side of approximately 6cm or less. The long side will be 30cm or less. ⚠️ 1-2mm sheets will have a short side of approximately 10cm or less. ⚠️ Because they are cut-off scraps, most of them have not had their edges processed. ⚠️ Occasionally, there may be some with cracks, chips, or slight processing, or with holes (only about 2 or 3 pieces at most). ⚠️ Due to weight restrictions, we will not use any special cushioning materials for packaging. We will simply put them directly into the box. ✅ With the Nekopos 1kg option, the amount that can be packed is small, so the contents will move around quite a bit in the box. ✅ With the Yu-Packet Post 2kg option, we will pack as much as possible, approximately 1.8kg. We have a large quantity available, so please consult with us about shipping options using other boxes. Thank you.