Orders by evening Ships from Osaka on the same day ε=ε=ε=┏(˃̵ᴗ˂̵)┛ ✼••┈┈┈┈┈┈┈┈┈┈┈┈┈┈••✼ Flash Series Low Viscosity Resin Liquid (Hard Type) ※ Becomes rock hard after curing ✼••┈┈┈┈┈┈┈┈┈┈┈┈┈┈••✼ UV-LED Light / UV Light Can be cured with sunlight♪ ✼••┈┈┈┈┈┈┈┈┈┈┈┈┈┈••✼ ☀︎ Because it cures in sunlight It is recommended to block the light before working in a sunny room (near a window)♪ ※ May harden during work ( ；´Д｀) ✼••┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈••✼ Usable materials (adhesion/coating) Plastic, metal, glass, paper, cloth Plated products, clay (paper and resin), plaster Natural stone, acrylic paint ✼••┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈••✼ With a smooth, moderate viscosity Fits into every corner of the silicone mold frame★ ※ Recommended to use thick molds♪ When cured, the bottom surface is not sticky It can be beautifully shaped, and it is easy to remove from the mold★ Because of the low viscosity, dyes (liquids, powders, paints, etc.) Easy to mix and can make the color uniform★ Blends well with dried flowers and small metal parts★ Bubbles are unlikely to form, and even if they do Easy to remove just by poking with a toothpick★ Easy to make even with soft materials like cloud resin and delicate materials, making it easy to handle★ ✼••┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈••✼ ★ Curing Time ★ Starts curing in 30 seconds or more from light irradiation‼︎ 【Example】When using a silicone mold Guide for curing time when making a work about 2 cm thick Using UV-LED light → about 3 minutes Using UV light → about 5 minutes Sunlight → about 10 minutes ✼••┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈••✼ Glass-like weight and texture, clear finish★ No fingerprints, and no stickiness★ ※ Please touch after it cools down because it gets hot after curing(＞人＜;) We would be happy if you could try it once(⌯˃̶᷄ ⁻̫ ˂̶᷄⌯)〰〰♡ ✼••┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈••✼