~Handmade~ Polymer Clay Cutter *Ethnic Freya 30mm x 28mm* Color: Random This polymer clay cutter is made using PLA filament. Ethnic/BOHO style design with embossed patterns.*˖⋆ You can use it by threading a jump ring through the cutout at the top. 0.4mm edge for a clean cut, smooth processing after cutting and baking.*˖⋆ Rounded base that is gentle on fingers.*˖⋆ Size: Approximately Design part 30mm x 28mm Height 15mm Color: Random · · • • • ✤ • • • · ·· · • • • ✤ • • • · ·· · • • • ✤ • • • · ·· · • • • ✤ • • • · · PLA filament is a material developed based on plant-derived PLA resin - mainly made from natural materials such as corn, potatoes, and tapioca, it is a plant-derived biodegradable bioplastic. This product uses high-purity, high-strength PLA/PLA+ filament.*˖⋆ ☆3D printing builds up by layering melted filament - We make it with settings that minimize the appearance of layer lines, but please understand that there may be some areas where there are shifts, burrs, layer lines, and stringing. ☆When using, especially cutters with fine designs, apply cornstarch etc. to the cutter when cutting, or remove the clay by pressing and removing it little by little several times instead of all at once, making it less likely to stick to the mold and easier to remove. ☆Due to the nature of the product, clay may enter the layers. Please wipe it off using a soft brush or cloth without applying force. ☆Although it is a strong and tough material, please be careful as excessive force, especially from the horizontal direction of the layers, may lead to damage. ☆PLA filament is generally weak to heat and softens even at low temperatures of around 60°C, so please be careful about the temperature when washing - Dishwashers cannot be used. #akikaClayCutter #PolymerClay