Kuru Kuru Knob (Carp) 1 set (2 pieces) *Handle not included We try to arrange them as similarly as possible, but they are not identical. *One side has two large air bubble chips. After creation, we have checked once to see if they attach properly using a Kuru Kuru handle we have at home, so they are listed as "Like New". Height: Approximately 23mm, Star diameter: Approximately 40mm Bolts: M8 Unichrome No accessories included There may be some misalignment in the center of the bolts, but it should not affect installation. Please adjust the orientation of the design by using a nut or similar. *Since they are hand-tightened, please check the tightening condition frequently. We use these knobs with rubber collars. We check and tighten them every time we use them. However, please be careful not to overtighten them, as this may cause damage. These are handmade by an amateur, so there may be air bubbles (we generally leave them), pinholes, burrs, and chips. We do not recommend these for those seeking a perfect finish like a commercial product. Please refrain from purchasing if you are concerned about minor imperfections.