The DEQ2496 is a digital 24bit/96kHz processor. It's a very user-friendly device, allowing you to create an EQ tailored to the sound field using a measurement microphone, suppress feedback with a feedback destroyer, and prevent speaker damage with a compressor. I used it a few times until two months ago. ・There are minor scratches on the LCD panel that are not noticeable when the power is on. ・There are scratches on the bottom. I am selling it after resetting it to its initial state due to a model change. There are posts from people using it for home audio on the Soundhouse product page. ■Type: Digital Equalizer, Feedback Destroyer, Analyzer ・Ultra-high resolution digital 24bit 96kHz processor for EQ/RTA/dynamic applications ・Four EQ modules that can be used simultaneously 31-band graphic equalizer 10-band parametric equalizer Feedback destroyer Three dynamic equalizers for each stereo channel ・Flexible compressor/expander function with peak limiter, stereo imager, and stereo delay ・Parametric control of the graphic equalizer is realized with the latest VPQ (Virtual Graphic Equalizer) option ・High-resolution 61-band real-time FFT analyzer with EQ function ・Independent RTA/microphone input, AES/EBU and S/PDIF input/output terminals, word clock input, MIDI connectors ■Frequency Response: 20Hz～20kHz (GEQ, PEQ, DEQ, Real-Time Analyzer) 10Hz～35kHz (at 96kHz sampling rate) ■THD+Noise: 0.007% ■Power Consumption: 10W ■Input Terminals: XLR x 2 ■Output Terminals: XLR x 2 ■Dimensions: 48.2 x 4.5 x 21.7cm, 1U ■Weight: 2.0kg ■S/N Ratio: 113dB ■Range: ±15dB ■Input Level: +12dBu or +22dBu ■AES/EBU Digital Input/Output: XLR x 1 ■XLR input terminal for measurement microphone, phantom +15V ■Word clock BNC terminal ■MIDI IN, OUT, THRU terminals ■24-bit/96 kHz ■EQ/RTA ■Mastering Processor