※※※This is a set of 2 items※※※ [3D Printed | Disposable Drain Hair Catcher] Are you having trouble cleaning your bathroom drain because commercially available drain hair catchers or drain nets don't fit? This product is a plastic hair catcher made with a 3D printer to solve such problems. Since it can be used disposable and hygienically, it significantly reduces the effort of cleaning the bath. [Compatible Drains] This product is compatible with Sekisui House bathrooms "Rakurin Drain" and the "Slim Trap Type" commonly used in Maison properties. *Compatible model numbers: HWT847 / HWU922 (manufactured by Sekisui Home Techno) *Please be sure to check the size of your home's drain before purchasing. [Size and Color] Size: Approx. 297mm x Approx. 50mm x Approx. 5mm (Reference: HWT847 298.5mm x 49.5mm) Color: Gray It blends well with the bathroom floor. [Important Notes Before Purchasing] - As this is a handmade item made with a 3D printer, there may be some layer marks or burrs. - The actual color may differ from the photo due to monitor settings. - This product is especially recommended for those who cannot use standard drain nets or are having trouble with commercial products. - For packaging convenience, this product will be delivered in two separate parts. After arrival, please assemble it by snapping the center parts together before use. - This product is made of PLA material (heat resistance: approx. 60°C). It can be used without problems in normal bathroom environments, but please avoid using it in places where a hairdryer's hot air directly hits it or for extended periods in direct sunlight. [Recommended for People Like This] - Those who live in Shamaison or Sekisui House. - Those whose drains are vertical, horizontal, or elongated and standard filters did not fit. - Those who are troubled by daily hair cleaning. *This product is not an original part but a handmade item of compatible size.