One-of-a-kind special price item. There is a defect during molding, and there are repair marks on the product, but it can be used without any problems if you install it while following the following installation precautions. Also, the repaired part will be the base and will not be visible once installed, so those who don't mind can try it out at a great price. The following is the usual product description: New Jimny JB64 Room Mirror Short Stay The mirror position is moved approximately 30mm upwards, dramatically improving visibility. We recommend this length for those who want to raise it as much as possible. Made of black ABS, it has superior durability, impact resistance, and heat resistance compared to PLA. I have been using it on a vehicle parked outdoors for 3 years, and there are no problems. *For Sierra, Nomad, and other desired lengths and angles, please inquire via questions. [How to Replace, Precautions] Please refer to image 2. During the work in ③, be sure to apply a load in the axial direction of the ball point and insert it. If it is hard, do not force it in, but warm the mirror side with a hair dryer, heat gun, etc., before inserting it. After insertion, be careful with the tightening of the screws on the back of the original mirror. After tightening firmly, Adjusting the angle of the mirror will put excessive stress on the stay, leading to damage to the stay.