Body Height Adjustable Rear Mount Set - Body For ZooRacing bodies ※Wolverine Max, Panterra, Hellcat, Dogsbollox. ・【CM-YOKO-ZJ】Yokomo MS1.0 BD12/11 (For vehicles with a post width of 106mm / height 46mm-48.75mm) ------------------- Can be screwed into the body's wing strut and mounted directly around the horizontal rear post. By using a 1.5mm hex driver, you can adjust the ride height (see photo). Notches added for easy measurement (see photo). There is a 2.2mm clearance above and below the holes for the body posts. This clearance and the bearings allow the body to move smoothly when the car rolls, improving handling. Since you don't need to drill holes in the rear of the body, body construction is easier for anyone. Manufactured with the best commercially available 3D printers. Type...Radio Control