I installed this on one of my guitars, but it was too thick and didn't fit, so I'm putting it up for sale. If you'd like to purchase this along with other guitar parts I have for sale, please feel free to contact me. Here's the official overview: ■ Set Contents ・Fat Spring Hanger Body x 1 (Brass) ・Close Screws x 2 (Brass, Length: approx. 45mm) ・Solder Plate Lug (Brass) x 1 ・Plate Lug Screw x 1 (Brass) ■ Size ・Width: approx. 50mm ・Depth: approx. 25mm ・Height: Max. approx. 14.3mm ・Hole Spacing for Screws: approx. 34mm (from the center of the holes) ■ Features ・Fat type, significantly thicker than the original Floyd Rose ・Screw hole spacing is the same as the original Floyd Rose ・Extra thick & increased weight ・High-quality glossy finish ・Improved sustain ・Improved harmonics and separation ・Includes 2 brass close screws, a brass plate lug, and a plate lug screw ・Convenient plate lug makes soldering easy (if you can't solder, you can simply sandwich the ground wire with the screw) ・High-end upgrade part For guitars equipped with FRT parts like Floyd Rose, and for spring hangers for general Strat and Dinky guitars. This is a fat type, thicker than standard brass. By installing it, you can expect improved separation, rich harmonics, and significantly improved sustain. The sound changes dramatically from the natural sound, and its true value can be realized when played through an amplifier, resulting in a luxurious tone. ■ Installation Notes Although the installation example in the photos could be installed without modification, the bottom is about 4 times thicker than a typical hanger, so the lower the angle of the screws, the more likely the hanger body will contact the body. (In the photo, the bottom corner of the body is lightly touching the body) Therefore, if the screws are installed in such a state, it may be necessary to drill new screw holes in a higher position. (Not recommended) Also, the hole spacing on the guitar you are trying to install it on may be different, so please consider carefully. Furthermore, the included screws may differ in size from the original screws, so in that case, please use the original screws without forcing it. We are not responsible for any issues during or after installation, so the user is responsible for…