This is a high-quality camera strap made with Italian horse leather. Second photo: Shows how to thread the strap through the camera. Third photo: Shows the length adjustment belt. Fourth photo: Shows the name (KAME) engraved, though it's quite subtle. Fifth photo: The engraving is present, but it will be hidden by the belt adjustment. Used less than 10 times. I used it without any issues with a Nikon Z9 and Z 50mm f/1.2 lens combination, which weighs over 2kg. I didn't attach it directly to the camera; I used Ulanzi's FALCAM MAGLINK. Peak Design's Anchor Links would also work well. Below is the product specification table from the manufacturer: ● Materials Strap Body: Oil Leather Shoulder Pad (Front): Horse Leather Shoulder Pad (Back): Cow Leather ● Color Black ● Size <Overall Strap> Length: 100cm - 135cm Main Body Length Adjustment: 6 steps, every 3cm <Camera Attachment> Width: 10mm Thickness: 1.7mm Attachment Length Adjustment: 5 steps, every 8mm (Adjustable from 3cm to a maximum of 6cm) * If the above sizes make attachment difficult, please use the separately sold "Strap Parts." <Shoulder Pad> Length: 42cm Width: Center 4cm / Ends 2cm ● Weight Capacity Approximately 5kg * Tested by suspending a 5kg weight, but this is not a guarantee. Original price: 18,700 yen.