Stainless Steel Table Pot 1.0L Insulation/Cooling HB-6023 Pearl Metal Akot Stainless Steel Table Pot Product Name: Stainless Steel Tabletop Vacuum Flask Product Size (approx.): Width 145 x Depth 110 x Height 225mm Usable Capacity: 1.0L Heat Retention: 58 degrees Celsius or higher (10 hours) Cold Retention: 13 degrees Celsius or lower (10 hours) Material Type: Inner Body: 18-8 Stainless Steel Outer Body: Stainless Steel Spout/Handle: Polypropylene Lid Plug: Polypropylene Opening/Closing Lever: ABS Resin Packing: Silicone Rubber Purchased new in June 2025 and used for about a month, then stored unused. I used it to put boiled water in the pot. (I did not use it for other drinks such as tea.) There are some areas of concern. Please check the photos. ⚠ There is dullness. ⚠ There are fine scratches and small scratches. ⚠ There are things that look like fine rust. (Shown in photos 7-8.) ⚠ There are areas that are white. (Shown in photos 11-12.) ⚠ There are scratches. (Shown in photos 12-13.) ⚠ The instruction manual is folded. (Shown in photo 16.) ⚠ On the top of the box, there is a mark where the sticker that was attached when purchased at the store was peeled off, and the paper has peeled off because it couldn't be peeled off well. (Shown in photo 20.) ⚠ I checked everything overall, but I apologize if I missed anything. Although it hasn't been used much, if you are looking for a clean product, please refrain from purchasing. There are no smokers or pets in the house. Thank you for your consideration. #StainlessPot #TablePot #StainlessTablePot #TabletopVacuumFlask #TabletopPot #PearlMetal