※ Before purchasing, please let us know your desired number, length, connector type/orientation, etc. in the comment section. Thank you for viewing. We also accept custom-made shielded cables of the same cable per meter. Please feel free to consult with us if you are interested. We will create patch cables using the standard guitar/bass cable, Canare GS-6, to your desired length. (Photo is 20cm L-L) Solder uses Kester 44, and plugs are available from: ○ Tomoca Flat L-type (approx. 1.2cm thick) ○ Classic Pro S, L-type (both sides L-type, reverse orientation possible) You can choose from these without any price change. 1 cable: 1280 yen 2 cables: 1910 yen 3 cables: 2550 yen 4 cables: 3320 yen 5 cables: 3980 yen The price is the same for lengths from 15cm to 30cm per cable. (Length between the metal parts at both ends, the contacts of the plugs) Please consult us for lengths longer than that or for 6 or more cables. We will create them according to your request, so please let us know the number, length, connector type/orientation, etc. in the comment section. For all connector types, we use heat shrink tubing on the hot terminal to prevent malfunctions, and we also apply heat shrink tubing to the gap between the cable and the plug to ensure a tight fit. With its outstanding durability due to OFC wire and perfect noise prevention processing due to the conductive vinyl inside the braided shield, the cross-section of the core wire is wider than other manufacturers' products, and the sound quality is also good, without excessive assertion, and it sounds like a good guitar. The outer diameter is 5.8mm and it is soft, and I feel that it is easier to handle when building an effector board than Belden or Mogami. These are virtually unused items, only tested for operation. We can also make shielded cables with the same specifications. Please consult with us. #gs-6