Set of two K&M 223 goosenecks for microphone stands and two SHURE microphone holders. (Photo 1) (Please note that items will not be sold separately.) 【Overview】 Boom microphone stands, with the boom arm holding the microphone holder extending forward and backward, surprisingly require a lot of space. Also, when a wind instrument player tries to adjust the microphone position with one hand to match their instrument, they may struggle due to the stiffness of the screws that secure the boom. The goosenecks in this listing are used by connecting them to the top of a straight microphone stand, and their shape can be easily and freely changed. (Photos 4, 5) Also, because they can be connected to a straight microphone stand, they don't require much space. Specifically, they are very convenient when the space for setting up the microphone stand is limited, or when different instrument players, such as trumpet or saxophone players, share one microphone for solo performances and want to easily adjust the microphone position with one hand. 【About the Items】 ① Gooseneck K&M 223, approximately 40cm long (Photo 2), weight 316.5g (Photo 3) Steel, silver color 3/8 inch screw of AKG standard. (Female and male at both ends) Diameter: Approximately 15mm ② Microphone Holder SHURE microphone holder A25D (same as the microphone holder included with SM58) With 5/8 inch to 3/8 inch conversion screw (The silver ones in Photos 9 and 10 are the conversion screws.) 【About Straight Microphone Stands】 Regarding connection to microphone stands, for example, they can be used by connecting to straight microphone stands such as TAMA MS200 or K&M 20120. The tip screws of these microphone stands are 3/8 inch, so the gooseneck can be connected directly. 【Other】 Regarding the gooseneck, on the website of Sound ○○s, a well-known audio equipment retailer, the K&M 223B (black) is currently sold, but the silver K&M 223 is no longer sold, so the silver ones in this listing may have already been discontinued. Thank you for viewing.