I found a 2-DIN audio installation kit "TBX-T004" for Mazda Atenza Sedan/Sport/Sport Wagon during parts整理. The panel is silver. It seems to be difficult to obtain these recently, so how about it for those looking for one? I have uploaded a part of the instruction manual for compatibility, so please check it. Unfortunately, there are some missing parts. The rear bracket and rubber bushings are missing. I think someone good at DIY could manage it... Also, the 24P connector for vehicle connection is not the original one. The included 24P connector has connection terminals (ACC/GND) specifically for the control unit, but that connector is missing. Fortunately, the connector is attached to the control unit, so I think it will be fine if you connect ACC power and GND from somewhere. The gap panel for the wide panel was also missing, so I will include one from my own stock. Regarding the condition, there is a small scratch on the opening angle of the panel (see photo). Please make sure your car is compatible. (I will refrain from answering any questions regarding compatibility.) 250722