3D printed SwitchBot mount kit specifically for Panasonic Advance Series. Instead of using double-sided tape, it's clamped onto the plate, so it won't damage the wallpaper. u ■ Installation Instructions 1. Remove the plate cover (decorative plate). 2. Remove the handle. 3. Loosen the screws of the metal mounting bracket. 4. Insert the switch plate base frame between the wall and the mounting bracket. 5. Put the switch plate back in place. 6. Attach the SwitchBot mount frame to complete the installation. ※ Remove the double-sided tape from the SwitchBot body before attaching it to the mount frame. ※ If your switch uses the following switches (dark-colored switches), there will be play in the SwitchBot arm, so you will need to apply the included cushion seal. WT5001, WT5002, WT5003K, WT500049, WT5341K ■ Compatible Switch Plates Advance Series switch plates (for single gang) WTA7101WK, WTA7101HK, WTA7101FK, WTA7101BK ■ Product Information Switch plate base frame SwitchBot mount frame Material: PLA resin ※ Color: Black ※ PLA resin (polylactic acid) is a plant-derived plastic material made from starch found in corn, potatoes, etc. There may be layer lines characteristic of 3D printing, so please understand this before purchasing. ※ The "SwitchBot" body is not included with this product. ◾️ Introduced on a buyer's blog. You can see how to use it and how to install it in the video. The blog name is "Asset Formation of an Ordinary Family" https://ordinaryfamily-assetformation.com/switchbotbotsuwitchosenai/