Clearance sale price. I build amplifier cabinets and speaker cabinets in my spare time, in addition to my main business of furniture making. I select SPF lumber with few knots and use high-quality lauan plywood for the back panel. It's a 10-inch cabinet, but I think it has a powerful sound that rivals a 12-inch. I recommend ceramic speakers. Speaker: 10-inch specification Body: SPF lumber (15mm thick) Back panel: Lauan plywood (15mm thick) Grille cloth: Antique Silver Baffle board: MDF (12mm thick) Speaker mounting screws (4-point, 5x20 truss head small screws included) Speaker mounting screw position (244mm) Wiring: Switchcraft #11 mono phone jack, shoulder-type insulating washer, plastic insulating washer, jack plate (may have scratches even if new), BELDEN 9497, Faston terminals (Audio-Technica TL205M, male side 5.2mm), Kester44 solder used Rubber feet: Commercial product Paint: Oil stain (walnut color), urethane sanding sealer base coat, urethane half-flat finish coat Dimensions: W450 x D230 x H360 (including 10mm rubber feet) Weight: 4.65 kg I put in the effort to build it carefully, so it has a solid construction, which also affects the sound. I hope you will enjoy experimenting with this cabinet, such as adding sound-absorbing material or changing the speakers and wiring, while searching for your favorite sound. The grain is continuous because the boards are assembled in order. The older growth rings (the outside of the tree) are on the outside of the cabinet, just as they were when the tree was alive. The body is joined using half-blind dovetail joints. I try to be as careful as possible in the manufacturing process, but there may be scratches, dents, warping, chips, cracks, color unevenness, paint unevenness, and speaker mounting marks, so please judge from the photos. This is an auction for the cabinet only, and speakers are not included, so please be aware. Shipping will be via Yamato Transport (cash on delivery, bring-in discount). I try to ship as quickly as possible.