Thank you for viewing! Immediate purchase without comments is welcome. This product is a tin toy walking figure of "Tetsujin 28-go" (Gigantor) made by the Osaka Tin Toy Institute. It was purchased from a recycle shop. This is a masterpiece made by the Osaka Tin Toy Institute, with only 500 units produced worldwide. While it is a reproduction, it adheres to the manufacturing methods of the time, recreating the weighty texture of tin. It is a discontinued item that is now difficult to obtain. The serial number is "280/500", befitting Tetsujin 28-go, making it a special piece for fans. ■ Brand: Osaka Tin Toy Institute (OSAKA TIN TOY INSTITUTE) ■ Product Name: Tetsujin 28-go Walking Robot (0T-01) ■ Serial No.: 280 / 500 ■ Color: Blue Silver系 (Blue Silver-like) ■ Material: Tin, some parts (hands, etc.) are rubber/resin ■ Size: Total height approx. 19cm ■ Product Condition: There is deterioration of the material (white powdering, surface cracking) on the parts of both hands due to aging. Although this is an unavoidable change specific to the material, it gives it a cool, vintage figure look. Also, there are small paint chips and minor rust on the joint parts and arms of the main body, but the gloss of the body is beautifully maintained, and it has a great presence when displayed. The outer box has some damage due to storage, but there are no major tears, and it is in a condition that suggests it has been carefully stored. The spring mechanism has been confirmed to work, and it walks energetically. * Please judge the condition from the photos. ■ Accessories: Main body, outer box, dedicated spring key (with engraving), serial number explanation sheet. * The condition of the product is based on my subjective assessment. Please note that there may be oversights in the inspection as it is a layman's inspection. * Please consider this item with the understanding and acceptance that it is a used/vintage item.