<<Compatible Models:>> Various MSX models Fujitsu FM-7 series (FM sound card and FM-77L2, FM77AV series) Sharp X68000 X1/turbo (MD controllers will not work due to lack of 5V power) NEC PC-8801mkIISR and successor models, PC-6001/6601 <<Compatible Controllers:>> Mega Drive, Master System, Mark III, SG-1000/II, SC-3000/H (Operation issues have been confirmed with some 8bitDO controllers. Products that are not from around 1990 may behave differently when the SEL signal is not connected.) This is a conversion cable that allows you to use SEGA Mega Drive controllers/pads on MSX and other systems. (Only the conversion cable will be shipped.) Created by cutting a new extension cable, rewiring it, and attaching a male connector. The bottom row of the Mega Drive pad's terminals, B*GA, is converted to AB無G for MSX, etc., and the BC buttons on the Mega Drive pad function as BA buttons. (Pin arrangement is based on facing the main unit) For 6-button pads, it is standard to start in 3-button mode by pressing the MODE button when powering on. There are times when there are issues even with the Mega Drive, and that's why there's a MODE button (to start with 3 buttons). 6-button pads sometimes send different signals than 3-button pads, which may be the cause of the problems. The Mega Drive pad in the photo has been connected to a Toshiba HX-10D MSX1 and tested with Xevious, and it works. The rapid-fire function also worked normally. Black cases are being replaced with new models. Shipping: Yu-Packet Post Mini Shipping notification: The shipping notification on the system will serve as the shipping confirmation. Immediate shipping upon payment Greetings and payment notifications are not necessary. Returns are possible, but the buyer is responsible for return shipping costs.