Replacement drive for Sharp AQUOS Blu-ray recorders. Made in 2016. Disassembled, cleaned, and pickup lens cleaned; maintenance completed. Compatible with most models, but some may not be supported. If you open the top cover and see a drive of the same appearance installed, replacement is generally possible. Compatible with BDR-L06 and L07 series. ※ Not compatible with built-in BD drive TVs. ※ Not compatible with BD-XL Vr.2.2 discs. ✦ The BDR-L08SHB is a high-performance drive that revamped the fragile AQUOS BD drives of the past. It excels in both reading and writing and can be used for a long time. When replacing a BD drive, it is recommended to replace it with the L08 series from 2013 onwards, rather than searching for the same model that failed. (There are many reports of the L07 series failing regardless of usage time, only based on the power-on time. Some consider them defective.) ● See image 3 for power-on time and usage time. ● 2-week operation guarantee after receiving evaluation. ● Compatible models: BD-W**, T**, S**, H**, HW**, and others (where ** are numbers) from 2011 and later. ※ Repairs are at your own risk. We will provide support as much as possible, but please understand that we cannot accept claims due to your own operational errors. ▼ Replacement method ① Remove the two side and three rear top cover screws. (Be careful not to remove the fan screws) ② Slide the top cover backward to remove it, then remove the four screws on the corners of the old drive and take out the drive. Disconnect the SATA plug on the drive side. ③ When installing the new drive, follow the above steps in reverse. ※ Depending on the model, it may be necessary to remove the front panel. ⚠ Be careful not to lose the screws. ※ No price reduction. However, discounts are available for multiple items; please consult before purchasing. 2 items bundled... Letter Pack Plus 520 yen discount 3 items bundled... Yu-Pack 700 yen discount Other bulk purchase consultations are welcome. #TsukiboshiAQUOSRepairParts #TsukiboshiTech