- Type: 6kW EV Normal Charger - Connector Type: Type 2 - Display: Digital Display The charging current is variable, so you can select the charging kW as needed. For 200V circuits: 8A - 1.6kW, 10A - 2kW, 13A - 2.6kW, 16A - 3.2kW, 25A - 5kW, 32A - 6.4kW Even if set to 32A, the vehicle's charger is 6kW, so the maximum load current is 30A, 6kW charging. It is compatible with both 100V and 200V, so you can use a conversion plug to change the voltage. The plug is a 200V 30A IH heater plug. Install a 2P30A IH outlet and plug in the charger's plug. Direct connection work is also possible using connection terminals, without using the plug and outlet. When using a plug outlet, use a 200V 30A IH heater outlet. I used a Panasonic one. Use CV cable of 8sq or more for the wiring, and use a 40A leakage breaker. Grounding work is also required. A spiral was used on the entire charging cable, so there are almost no scratches on the cable. The spiral is not included. Storage case and instruction manual included. The images are everything.