Manufacturer → Original Head → 38mm x 105mm 1.2kg Body → 22mm 2 rotations Material → All stainless steel Length → 300mm Twist → 2 rotations Total length → 300mm Engraving → Consultation required ※ 2-rotation specification in the image 32mm head 19mm body 2 rotations 26,980 yen Shino processing 2,000 yen ↑↑↑ Based on this, ・38mm head → 2 rank up + 4,000 yen ・22mm → 1 rank up + 2,000 yen Total 34,980 yen #ANELLO_FACTORY ↑ Twist ratchets, extra-thick ratchets, Hammers, etc., other works are also available here, so Please take a look if you are interested. 【Twist processing】 When heat treating with a burner, to prevent the material from hardening due to quenching, it is carefully processed while locally heating, and then heat treated by tempering. 【Polishing】 Using 4 types of polishing agents, the grit is gradually increased, and the final polishing is done with a liquid polishing agent. 【Remarks】 After the final polishing, a rust inhibitor is thinly applied, so it is resistant to rust. A polishing agent is enclosed, so please use it for maintenance. 【Shipping】 Anonymous shipping, and either Takkyubin Compact, Nekopos, or Click Post, which are trackable. mcc Wrench Twist Gacha Twist ratchet TRUSCO Gear wrench Combination Warabi Ueda Stainless steel Polishing top tajima Tools TONE Supertool Shino Knicks Supertool Monkey Lobster Polishing Glasses Tools Maintenance Tobi Scaffolding Steel frame KH Ironworks Motorcycle Car diy Pro Bolt Nut Total polish