ITALY Split Leather Black Color Italy This is black split leather from Italy. Please note that there is no grain (surface). This is split leather, a byproduct of finishing leather. Thickness may vary, approximately 0.2~0.3mm. Please refrain from purchasing if you are looking for a perfect product. ※ There are wrinkles. ※ There may be sun-fading on the edges. ※ There are scratches and scuff marks. ※ There are dark (black) marks and scratches. ※ The color differs between the front and back. Large-sized cut. Width is approximately 22-24cm, with some indented areas. Length is approximately 102cm, measured in the middle. Dimensions may vary depending on the location. Thickness is approximately 1.2mm to 1.4mm. Thickness may vary depending on the location. This is split leather produced when skiving a single piece of leather. I usually use this as a core material. Because the original leather is vegetable-tanned, it can be polished together with the top leather even when the core material appears at the cut edges after bonding and cutting, making it easy to use. It is used for reinforcement by bonding to the back of root leather, adding bulk to parts, and when making the core of a handle with leather. In addition to natural leather, there may be small scratches, as it is originally the back side. It will be folded and shipped in an A4-sized box. Thank you.