Rare K2 222 MID Mountain Skis 170cm with ZILBERETTA 302 Bindings, Inserts Thank you for viewing. These are alpine skis, but I have used them for mountain skiing for many years. They have been modified with inserts, so they are recommended for those who are familiar with this type of equipment. The advantage of inserts is that you can switch the expensive bindings to other skis. If you have 18 M5 insert nuts, you can transplant them to other skis. The inserts are from Hakuba B shop, which is well-regarded for mountain skiing. ■ Specifications ・ Dimensions: 170cm_86-70-78mm ・ Bindings: ZILBERETTA 302_K_Installed with inserts to fit GORO's heavy mountaineering boots, 25.5cm. One spot has a construction defect, and the bolt is not inserted, but it can be used without any problems. There is no damage, but there is some whitening of the resin parts, so please be aware. All screws are SUS-M5-TORX, but M5 screws of other standards can also be used for fixing. If you wish, I can replace them, but it will take time due to lathe processing. ・ Sliding surface: No major scratches or rust, base-wax applied and stored indoors. ・ Inserts: In addition to ZILBERETTA 302, TLT inserts are also installed. They are already installed for Dynafit_ST_rental. The hole position is set with a 15mm margin behind to fit a 284mm sole. Although not originally necessary, the TLT inserts are plugged with M5 set screws (SBL). ・ Accessories: ZILBERETTA original ski stoppers