【Improvements】 Version 2.0 released. ・The top jug is now smoother. ・Slits have been added on both sides, allowing boards to be inserted from either side. ーDescriptionー This is a training hold for people who want to do hangboard training at home. This hold is a "switchable" training hold that can be adjusted from 10mm to 30mm in thickness (patent pending). It has slits on the sides, and you can change the depth of the holding surface simply by inserting a board. You can adjust the intensity like a weight machine at the gym. There is also a 35mm incut on the top of the main body, so it can be used for warm-ups. Available in beige, but other colors are also available (black, white, red, light blue, etc.). If you have a preference, please let us know via message after purchase. ⸻ 【Features】 ・The slits allow you to freely switch between 5 levels (10/15/20/25/30mm) of holding surfaces. ・The top has a 35mm jug that can also be used for warm-ups. ・Friction processed, so you can train without chalk. ・Unlike other products, you can train with different thicknesses in the same position → Being able to change only the thickness allows you to concentrate on holding more than you can imagine. ・By changing the thickness on the left and right, you can strengthen your weaknesses or push yourself with different intensities on the right and left. ・The main body and plate have through holes → If you connect them with a string, it will prevent loss. ・8 mounting screws included ⸻ 【Size and Specifications】 ・Body size: W110mm × D35mm × H60mm ・Holding surface depth: 10 / 15 / 20 / 25 / 30mm (+ 35mm on top) ・Material: PLA (3D printed) ・8 screws included (for wall mounting) ⸻ 【Notes】 ・PLA material softens at 100°C or higher, so please avoid storing it in a car in the summer. ・Also, overtightening with an impact driver may weaken the area around the screw holes due to friction heat. Please be careful not to overtighten. Bouldering Climbing Training Hangboard training Crimps training Hold