This is a DIY wakasagi reel kit developed with the concept of "overwhelming productivity and robustness, like an AK rifle." I made this reel, not an expensive dedicated machine, but one that is inexpensive and can be used heavily. The main body has an extremely simple structure with only one screw, a spring, and a few washers. We are pursuing a "tool" that can be used without fear of failure. If you get tired of it or it breaks, just throw it away, it's disposable anyway. 【What you need to prepare yourself】 Please purchase the following two items separately at Daiso: ・Electric eraser ・Craft bobbin 【Line】 Daiso's thin PE line is a great match, including cost performance. 【Color】 Black, red, white, etc., but we will basically pack and send random colors. 【Notes】 Rod is not included, so please prepare it separately, with a base diameter of φ5mm. This product is a handmade DIY part, so please refrain from purchasing if you are looking for a finish like a commercial product. This is a "DIY kit" where you will need to install and adjust it to the "electric eraser" yourself. 【Assembly】 Please assemble in the following order, referring to the product images: 1. Insert the spring, short spacer, and washer onto the screw, and insert it into the main body. 2. Insert the medium spacer, long spacer (& spool), and 2 washers in order, and tighten the nut. 3. Remove the cap at the tip of the Daiso eraser that you remove when replacing the batteries, and insert the disposable wakasagi reel in the same way, "while pressing the head of the screw" (it's stiff at first). By pressing the head of the screw, the reel is released and the rig will drop. It is prone to backlash, so let's lower it while holding the reel with your finger. 【TIP1】 It is convenient to attach a mechanism to lock the line from being wound up too much. Attach a float stopper, small bead, and large bead in that order. 【TIP2】 The mysterious recess next to the line hole is a spare eraser holder. Prepare for when the eraser on the main body wears out or is lost. 【TIP3】 The mysterious recess on the back of the main body is designed to fit a Daiso neodymium magnet. You don't need to attach it if you don't need a tapping base. 【TIP4】 The spring is made strong, so cut it appropriately if you think it's too strong. A spring from a knock-type ballpoint pen can be used as a substitute if lost. #Wakasagi #Smelt #ElectricReel #Beginner #DIY #Homemade