Unused, unopened, and in good condition, but please refrain from purchasing if you are concerned about minor scratches or dirt. [Product Description (Quoted from Amazon)] [Uses] ● For assembling distribution boards, and installing fittings and exterior materials [Features] ● Limited color (Dull Red) ● No-load speed: 1200 rpm. Approximately 4 times faster than the previous models (220USB-1/-5). ● Low-rebound specification. Electric tightening stops at 0.4 N·m. ● Sleeve chuck that can use both-end/single-end bits with a hexagonal across-flats of 6.35mm. ● Easy charging with a USB port. Equipped with overcharge protection, over-discharge protection, and overcurrent protection functions. ● Lightweight body of 160g, even when placed in a waist bag. ● High-hardness LED light to assist work in dimly lit environments. Lights up for 5 seconds after use for confirmation. ● Sleeve chuck for easy bit replacement. Front slide type to prevent bit drop-out. ● The included bit has a slim shape and a shaft cover to prevent short circuits, assuming work in terminal blocks and distribution boards.