Thank you for viewing! This is a print seal that adheres with an iron. Iron-on for 15 seconds 3D print sheet with a pop-out image ① Prepare a firm ironing board. ② Set the iron temperature to medium dry (150°C). ③ Place the fabric you want to print on the ironing board. ④ Place the sheet with the adhesive side (white side) down in the desired position for printing. ⑤ Apply the non-steam hole part of the iron directly to the sheet, and press down firmly with both hands, applying your full weight for about 15 seconds to heat-seal. ⑥ Remove the iron and peel off the sheet. ⑦ Finished.