For drifting. This is a Tamiya TT02 modified with a slide rack. Since there were no parts available to lower the height of the slide rack's protruding rods, the chassis has been modified by cutting off the interfering parts to lower the height of the rack itself. The front upper and lower arms are Reve D RDX. The rear is mostly untouched, so there's plenty of room for customization♪ Servo: None Motor: None ESC: None Gyro: Yokomo Transmitter/Receiver: None Body: None Options: CVA dampers Front FRP damper stay (shock tower) Full bearings Included: Wide tread axle shafts x 2 Hubs for the above x 2 Body post position adjustment parts x 4 *Only the gyro in the photo is included. Drift RC RC Drift