This is a stand for 1/6 scale dolls. The base has a pink cat-paw design. The contents are shown in the fourth photo. *Unlike the previously sold version, the pole is made of metal instead of acrylic.* The base is 11cm wide. The stand is adjustable as shown in the photo. It can be adjusted from 9.5cm to 16.5cm. Since the base is 1.5cm thick, it will be longer for poses that don't use the feet on the stand. The acrylic plate on the base will be delivered with a protective sheet attached, so please peel it off as needed. *The third photo shows the state after removing the protective sheet.* The protective sheet may have been reapplied for inspection, and the bag may have been opened. Thank you for your understanding. The pole that inserts into the base is quite tight, but it will fit if you insert it while twisting. *It is not the type that inserts all the way in, so there is no need to force it in deeply. If it still doesn't fit, you can make it easier to insert by sanding the insertion part of the stand pole little by little.* Of course, it can be used for figures other than dolls. If there are any remaining in stock, please contact us if you need multiple items. #Azone #Obitsu #Licca-chan #Barbie #Doll #Figure #Stand