Compatible Vehicles Jimny JB23 Late Model (Type 6-10) It has been made more compact than the previous model, and the wiring length has also been improved. This product can cancel the clutch start system installed in JB series vehicles. For Jimnys up to Type 6, the clutch wiring can be short-circuited to cancel the system, but for Jimnys from Type 6 onwards, driving as is will result in an error display and the transfer switch will become inoperable. This product allows you to safely cancel the system without displaying an error, even in Type 6 and later models, by inputting a separate signal. By canceling the clutch start system, you can use an engine starter even in MT vehicles, and you can start the engine without having to get in the car when car camping or during warm-up. No switch operation is required, as it is automatically controlled. Also, since it does not use constant power, there is no need to worry about battery drain due to the installation of this product. Although four wires are required, the locations are not particularly difficult, and all wiring can be done inside the vehicle. Instruction manual included.