This is a Musikraft replacement guitar neck for Fender-style guitars, made in the USA. I purchased it a few years ago for $330. It's a quarter-sawn maple neck. I had it installed on an American Standard Fender body. When I had it assembled by a Japanese guitar maker, the unfinished neck was given an oil finish. *I used to have a decal on the headstock, but it got burned on, so I sanded it down a bit. I think it's a high-quality neck, but it's a used item, so please understand before purchasing. Basic Specifications: For right-handed players (standard right-handed guitar) Scale Length: 25.5 inches (Fender standard scale) Number of Frets: 22 frets Nut Width: 1-11/16 inches (approx. 42.85mm) Heel Width: 2-3/16 inches (approx. 55.56mm) *Fender standard Tuner Hole Diameter: 10mm (compatible with Gotoh / Schaller / Sperzel) Truss Rod: Dual action (vintage type at the neck end, slot nut adjustment) Fingerboard Radius: Compound radius 7.25”〜9.5” 12th Fret Position Mark Spacing: Narrow (post-1964 style) Nut Slot Style: Shelf processing for Floyd Rose (for locking nut) Neck and Fingerboard Materials: Neck Material: Quarter-sawn maple Fingerboard Material: Rock maple Fingerboard Style: Slab board (Fender standard style) Frets: Stainless steel Type: Electric Guitar