Steel self-supporting monopod (1.5m) Although I opened it once, it is unused. I think it is in good condition, but please purchase it if you understand that it has been stored by a private individual. It was a popular product and was in short supply. The price includes shipping, so please refrain from price reductions. Material: Body: Steel, polypropylene, aluminum Single item size: Shortest: 50 x 44.5 x 64.5cm (including pole head) Longest: 50 x 44.5 x 166.5cm (including pole head) Holder: 8 x 3 x 2.5cm / Shortest width 6.5cm, Longest width 8cm Package quantity: 1 piece Product Description: 3-stage type, Load capacity *The load capacity is a measured value and is not a guaranteed value. It varies depending on the material and strength of the mounting side. Please be sure to consider this before using. Smartphone, small camera, ball head angle adjustment, adjustable up to 90 degrees, can be attached with two screw holes, 3rd stage fixing knob, 2nd stage fixing knob, stand & 1st stage fixing knob, longest approx. 149cm, shortest approx. 64.5cm, length approx. 50cm, total weight approx. 470g, longest (width) approx. 8cm, shortest (width) approx. 6.5cm Accessories: Smartphone holder, ball head, protective cap Loosen stand & 1st stage fixing knob ①. While holding the pole, spread the stand legs ② in the direction of the arrow. While holding the pole, lower ③ in the direction of the arrow. Lower the pole until the stand legs are securely fixed. Tighten each fixing knob securely. *When turning the fixing knob, be careful not to remove the nut. *When closing the stand legs, hold the pole and slowly raise the top of the stand legs. *Remove the protective cap attached to the tip of this product and attach the ball head securely before use. DAISO Camera, Photography, Equipment, Streaming, Tripod