PC Body ⇒ This Product ⇒ VGA Cable ⇒ Display This is a cable for connecting a digital RGB output retro PC to an analog RGB display. It lowers the voltage of digital RGB (8 colors) from TTL 5V to 0.7V using a 150Ω resistor for 15kHz horizontal sync frequency analog RGB. As the name "RGB" suggests, there is no blurring like composite or S-video, and the characters are clear and easy to read. This is used between the PC body and a general-purpose analog RGB cable with a mini D-sub 15 3-row connector. Therefore, it is short. Compatible models: Digital RGB DIN 8-pin C type NEC #PC-9801 #PC-8801/8001 #PC-6001mkⅡ and later (8 colors only compatible) / PC-6601 Fujitsu #FM-8 #FM-7 #FM-NEW7 #FUJITSU #MICRO7 Sharp #MZ-700 series Etc., those with a digital RGB DIN8-C output terminal. Compatible displays: Mini D-sub 15-pin 3-row terminal (commonly called a VGA terminal) that supports a horizontal sync frequency of 15kHz. (400 lines is 24kHz) Information such as those that can be displayed but require adjustment on the display side can be found on the internet. Please find a combination that matches the PC body and display, and that is compatible. Shipping: Free shipping Shipping: Yu-packet Post mini Shipping notification: The shipping notification will be sent on the system's shipping date and time. Immediate shipment upon payment Greetings and payment notifications are not necessary. Returns are possible, but the buyer is responsible for the return shipping costs. Details: The RGB and sync frequency GND grounds are separated into different systems, but there are no complex circuits, only wiring and resistors. (Connect two of the nine wires to each GND. 2 + 2 = 4 wires) Since the resistors are somewhat air-wired, they are fixed with a glue gun. In addition, to improve the durability of the terminal connections on both sides, the solder and coating of both terminals have been processed. Two fixing screws are attached to the main body terminal side. Female screws are not attached to the analog RGB cable side. After creation, display was confirmed on PC-8801mkⅡ before packaging.