This is a set of three extremely thin mekugi (peg) made by processing saibashi (chopsticks). The diameter is approximately 3 to 6 mm, and the length is approximately 4.3 cm. You can fit the mekugi by simply inserting them into the mekugi holes and cutting off the excess, but some adjustment may be necessary as they are ready-made. We received requests that "the mekugi material is too thick and difficult to process," so these are for swords with special small mekugi holes, for cases where the mekugi hole in the tang and the mekugi hole in the hilt are slightly misaligned, or for temporary mekugi during processing. Please use them when you need thin mekugi. Since they are thinner than regular ones, do not use them for iaito (practice swords) or tameshigiri-to (test-cutting swords) that are subject to high stress. If you need to make slight adjustments, please use sandpaper, files, etc., to process them. This product will be sent by regular mail in an envelope, so please be aware of this. Shipping is free. Returns are not accepted.