【UPDATE】Also compatible with Sesame Face Pro AI version This is a sliding lid that allows for a clean look when attaching the Sesame Face Pro (Candy House SESAME FACE Pro) with magnets by incorporating magnets. Since the magnets are built-in, double-sided tape is not required. It is thinner (approx. 3.38mm) than the thickness (approx. 7mm) when using the included sliding lid, double-sided tape, and magnets. Use it as a replacement for the sliding wall side part of the back lid included with Sesame Face Pro. Designed exclusively for "Sesame Magnet". Sold separately. Use the genuine Sesame magnet and attach it so that the magnetic force faces the wall. "SESAME Magnet" can be purchased at the Sesame official store or the Candy House store on Amazon. Adjust the number of magnets depending on the compatibility between the surface to be attached and the magnets. If the surface to be attached is slippery, use a non-slip sheet. Since thick non-slip sheets weaken the magnetic force, use a thin one. When installing, check the magnetic force to ensure that the main unit does not fall due to vibrations from opening and closing the door. Material: ASA ※Caution Sesame Magnet, Face body, etc. are sold separately. We are not responsible for any problems that may occur when using this product. This product is a 3D printed item of our original design. There may be color mixing, stringing, and layer irregularities unique to 3D printed products. The details of the design may be changed without notice and may differ from the photos.