Features: 1.2mm blade thickness, the thinnest blade for safety. Low resistance during cutting. Applications: Cutting raceways, electrical conduits, slotted angles, stud bolts, metal moldings, and furring strips. Outer Diameter (Φmm): 125 Number of Blades: 28 Hole Diameter (Φmm): 20 Blade Thickness (mm): 1.2 TRUSCO Part Number: 360-8981 Weight (g): 140 Maximum Operating Speed (min-1 [r.p.m]): 9600 Cutting Capacity (mm) Stainless Steel: 2 Cutting Capacity (mm) Steel: 4 [Applications] Angle steel / Flat steel / Checkered steel plate / Channel steel / Steel pipe / Deck plate / C-channel steel / Gas pipe / Hanger rail / Rebar / Lined steel pipe, etc. ■ Suitable for relatively thin cutting materials. By making the blade chamber shallower, lateral deflection is suppressed, and straightness is improved. ● Cermet Tip: Achieves smooth, long-lasting cutting even with hard metal materials due to its amazing wear resistance. ● Thin Blade Design: Designed with the thinnest possible blade. Compared to thicker blades, there is less chipping, and cutting resistance is reduced. Sharp cutting performance lasts longer. ● Cutting Depth Limit Guard: A guard section is set to limit excessive cutting depth during cutting. Reduces chipping of the blade tip. ● Low Noise Slit: Newly developed low-noise slits are used on the base metal. Significantly improves vibration suppression and soundproofing effect. ※ For combined iron/stainless steel saw blades, using them for either iron or stainless steel will result in longer blade life.