New, Unused Mighty Mite MM2930 Never used after purchase! New and unused! This is a Fender licensed product, and it's a neck that can be directly installed on guitars with "Fender" or "Squire (by Fender)" on them, unless the guitar is very unusual. The Mighty Mite brand is branded on the neck end, and the wood level is the so-called A2-A3 level. Although bird's eye and flame patterns are not immediately visible, it is a very carefully crafted neck when you hold it in your hand. ■WOODS & MATERIALS Fretboard Material: Ebony Neck Material: Maple Skunk Stripe: Merbau stripe Finish: Satin, Thin Polyurethane Oil Based ■SIZE & SHAPE Neck Profile Shape: C Shape Orientation: Right-hand Scale Length: 25 1/2" Radius: 9.5 Straight Nut Width: 42mm installed nut Nut Material: PPS-Flat Bottom Heel Size: approximately: 2 11/64" wide by 3" high and 5/8" deep ■FRETS & MORE Number of Frets: 22 Fret Size: Jumbo - 2.9 mm -- Nickel Inlays: Pearloid Dots Side Dots: White Truss Rod: Single-adjust at headstock - 4mm wrench not included Tuner Hole Size: 10mm 6-in-line Modern Tuners ※Please allow for some margin of error due to actual measurements. ※Specifications are subject to change without notice. ※There may be uneven paint, minor scratches, and other rough processing that are difficult to see in the images. ※Even if you have a genuine Fender body, please be sure to check the neck end size, etc., to see if it can be directly installed on your guitar.