This is a jig for cutting Mini 4WD tires. It supports small-diameter tires and medium-diameter low-height tires. Please refer to the photos for the finish. The cutting dimensions are 22.5, 23.0, 23.5, and 24.0, in four varieties. These are based on when the tires are mounted on aluminum wheels, but the dimensions are not guaranteed. A screw pitch feed is used for the blade feed during cutting. An instruction manual is included, so please read it carefully before use. We have made efforts to make the finish as clean as possible, but please understand that this is intended for pre-processing before cutting. This is a jig that handles blades. Please handle with extreme care. For confirmation after completion, screws may be attached and cutting may be performed. There may be oil remaining from the cutting process, but this is not abnormal. The tires and wheels shown in the photos are not included. This product is handled in stores. Other colors are limited to stores, so color changes are not possible. ※ As a standard, please note the following points. This product is produced with a 3D printer. Please purchase only if you understand the characteristic layer lines, production by individual handwork, discoloration during layering, etc. We cannot guarantee any damages caused by using this product. Please purchase the products from the following: #nonbiry_lab Search tags: #Mini4WD #Tires #Cutter #Jig