This is an embroidered iron-on patch of a crown. m(_ _)m It is a beautiful patch with a lovely pink color. Crown size: Approximately 7cm (height) x 10cm (width) *Iron-on adhesion is not possible on waterproof or water-repellent materials. 1. Temporary Adhesion Place a thin cloth such as a handkerchief or gauze over the material where you want to attach the patch to prevent damage. Iron over the patch. The key is to apply weight with medium heat for about 10 to 20 seconds. Be careful not to damage the material with heat and adjust the pressing time accordingly. *Please be especially careful with thin polyester and nylon materials. They are sensitive to heat and may melt. The patch may peel off while it is still hot after ironing, so wait for it to cool down and check that the patch is securely attached. If it peels off, the adhesion is not yet complete, so increase the ironing temperature and time. 2. Permanent Adhesion Iron from the back of the material where you want to attach the patch. Do not forget to use a cloth and apply weight to press firmly. If the material is thinner than the patch, this step will allow heat to reach the film more directly, resulting in more effective iron-on adhesion. *Iron-on adhesion is not a 100% permanent attachment method, so we recommend attaching it with sewing as well. Although carefully made, there may be slight distortions or errors due to it being handmade. We kindly ask for your understanding of handmade items before purchasing. m(_ _)m Motif: Cross Parts: Patches, decorative materials