# You can see all products from Sakura Miyabi Acrylic Boards ☆ ⚠️ As of December 22nd, only 3mm thick sheets can be secured in 1kg quantities for one type. For other thicknesses, even if specified, other types may be mixed in. There are some slightly larger pieces with both sides being 6cm or more. ☘️ These are offcuts of acrylic sheets from our processing factory. ☘️ They are new, unused items with protective film attached. ☘️ We will pack as much as possible into a dedicated box (within the weight limit). ☘️ 【1mm/1.5mm/2mm/Rarely 4mm】 【3mm】 【5mm/Rarely 8,10mm】 We have separated them into boxes for each thickness, so if you have a specific request, please let us know after purchase. If there is no specific request, we will put in the most abundant ones first. ☘️ They are machine-cut, so the right angles are accurate. ⚠️ These are small offcuts with a short side of approximately 6cm or less. The long side is 30cm or less. ⚠️ For 1-2mm thick sheets, the short side is approximately 10cm or less. ⚠️ As they are cut-off scraps, most of them have not had their edges processed. ⚠️ Occasionally, there may be some with cracks, chips, or some processing, or with holes (only about 2 or 3 pieces at most). ⚠️ Due to weight restrictions, we will not use any special cushioning materials for packaging. We will simply put them directly into the box. ✅ For Nekopos 1kg, the amount that can be packed is small, so they will move around quite a bit in the box. ✅ For Yu-packet Post 2kg, we will pack as much as possible, which will be around 1.8kg. We have a lot of them, so please consult with us about shipping in other boxes. Thank you.