Kuru Kuru Knob (Carp) 1 set (2 pieces) *Handle not included We try to arrange them as similarly as possible, but they are not identical. *The bolt on one side is slightly off-center and angled, but this does not affect installation. After creation, we have checked once to see if it fits properly using a Kuru Kuru handle we have in storage, so it is listed as "Like New". Height: Approximately 23mm, Star Diameter: Approximately 40mm Bolts: M8 Chrome Plated No accessories included. There may be some offset in the center of the bolts, but we believe it will not affect installation. Please adjust the orientation of the design by using nuts, etc. *Since it is hand-tightened, please check the tightening condition frequently. We use rubber collars with these knobs. We check and tighten them every time we use them. However, please be careful not to overtighten, as this may cause damage. These are handmade by an amateur, so there may be air bubbles (which are generally left), pinholes, burrs, and chips. We do not recommend these for those seeking a perfect finish like a commercial product. Please refrain from purchasing if you are concerned about these imperfections.