○ Shaft removal tool. Compatible with all clubs, from drivers to irons, and various sleeves. ○ A vise (bench vise), a heat gun, and a 19mm wrench are required separately. Please use what you have, or if you don't have them, search on Google or Amazon using keywords such as "bench vise" and "heat gun." Both are sold for around 2,000 yen. When purchasing a bench vise: ・ The width of the main body's jaw mounting part (the part to be clamped in the vise) is approximately 67mm. Since the width for tightening the bolts is required, we recommend a vise with a mounting part of 100mm or less. ・ To clamp the shaft removal tool body and the golf club, please use a vise with an opening (jaw width) of 50mm or more. ○ The clamp part is approximately 68mm. The main body is made of steel to withstand tightening in a vise. ○ A 12mm bolt is used for the central bolt, which is essential for durability. (If this bolt is thin, it will deform with repeated use.) ○ Detailed instructions with images are included. 【Included Items】 ・ Shaft removal tool body ・ Head fixing plate x 1 ・ Protective rubber sheet x 1 ・ Instruction manual ※ Please prepare a heat gun, a vise (bench vise), and a 19mm wrench separately. 【Important Notes】 ○ Please secure the main body firmly with a vise (bench vise). ○ Although new, there may be traces of grinding and polishing after welding. 〇 Each item is handmade, so there may be slight individual differences. (There is no problem with use.) 〇 Lubricants such as grease are applied to ensure smooth movement, so we recommend wearing gloves. ○ This product is intended for personal use. If you are looking for professional specifications, please consider products from other manufacturers. 【Regarding Transactions】 ○ Please carefully check the description and images to prevent any problems. Thank you for your understanding. Head Removal