Thank you for viewing! This is a silicone tube for wacky/ neko rigs for Spatula 7.8 (Nagasupa) and 4-inch Yamamoto Senko. It can also be used for worms of similar thickness to Spatula 7.8. Everything in the first photo is included. Compared to heat shrink tubing, there's no need for cutting or using a lighter. You can use it simply by inserting it. For Nagasupa, you can easily insert it by gently pulling it in from the head side. The size for the 4-inch Yamamoto Senko is tight, but by carefully inserting it from the tail end to avoid tearing the worm, you can set it up to the middle or the band part. By using thick silicone tubing, the hook hold is better compared to a direct hook neko/ wacky rig. It fits perfectly for Nagasupa and prevents it from slipping off easily, and it fits snugly for the 4-inch Yamamoto Senko, allowing for lively action while preventing the worm from tearing. The tubes are handmade and hand-cut, so there may be slight variations in width, but they should not affect usability. You can also cut them in half as shown in the fourth photo. There are 20 pieces included. One extra is included as a spare. Size: Inner diameter 7mm / Outer diameter 10mm, Width approx. 8mm. Please check the photos. Tube material: Silicone Number of tubes: 20 + 1 Since these are handmade, please refrain from purchasing if you are concerned about the condition. Also, please refrain from returns or complaints. 【Request】 Negotiations for price reduction are sometimes accepted for requests made through the "Price Reduction Request" button, but direct price negotiations in the comment section are not accepted. Fishing type: Lure, Black Bass, Bass Fishing #Handmade #Issei #GaryYamamoto #BassFishing #BassFishing #Worm #StraightWorm #Spatula #Spatula7.8 #YamamotoSenko #Senko #Nagasupa #YamamotoSenko #NekoRig #WackyRig #WackyTube #Silicone #SiliconeTube #SiliconeRing #SiliconeBand