Steel TV wall mount Purchased for a Hitachi UT37-XV700 (37 inch). The TV itself weighed 17.4 kg (catalog value). Later, I used it even after replacing it with a Panasonic TC-40CX700 (40 inch), which weighed 14 kg (catalog value). - Model: TB-LKF0082 - Type: TV wall mount - Material: Steel - Size: Compatible with TVs from approximately 37 inches to 40 inches. I think it can support even larger TVs if the wall strength is sufficient. Bracket size: Width - 632 mm Height - 490 mm How to install: 1. Attach the bracket ① to the screw holes on the TV. Most TVs have holes for mounting. The bracket holes are adjustable at widths of 200 and 400 mm, and heights of 125, 165, 200, 234, and 270 mm. Currently assembled at a width of 400 mm and a height of 200 mm. If it doesn't fit, adjust the position of the bracket holes. (Drill holes if necessary) 2. Attach bracket ② to the wall. For boards, find a place with wooden studs underneath and secure it firmly with long screws. If there are no wooden studs, use board anchors. (Anchors are included) Hang the TV with bracket ① attached on bracket ② attached to the wall, and secure it firmly with the bottom screw ③. I will ship it assembled in the installed state, so please remember that state well. After arrival, separate it into two parts during installation. Thank you for viewing.