This item was created using a 3D printer. Please be aware that the precision of industrial products cannot be expected. This is a jig that can be used like a template when processing the catcher for the catcher damper for the MS chassis, a standard modification for Mini 4WD cars. The product includes only the first image; the second image of the car body is not included. *The second photo is a reference image of the hole positions of the old product. Basically, the hole positions have not been changed, but please use it as a reference only. The thickness is 2mm, the hole positions are the MS chassis hole positions at the front (photo 2), and the three-hole and two-hole positions for the mass damper square at the rear, with a hole diameter of 2mm. A hole is made in the center to avoid the anchor protrusions. Please use it as you like. Basically, please use it assuming that you will fit it to your car body. Also, due to the fact that this product is made with a 3D printer, there may be warpage, burrs, stringing, and chipping in fine details. We only sell and ship items that do not have any problems with use, but the above details are unavoidable. Please understand. Thank you. Type...Mini 4WD Specifications...Other Scale...Other